Stud
Threaded Studs for automobile
LF stud (W・TOP stud)
| Size | M6 |
|---|---|
| d1 | M6×1.0 |
| d2 | 9 |
| d3 | 13 |
| t1 | 1 |
| t2 | 1 |
| L | 20 |
| 23 | |
| 25 | |
| 27 | |
| 30 |
*There is stud with pitch-lock.
Material: SWCH15～18 (Strength Classification: 6.8)
Surface Treatment: Zinc or Copper plating
Permissible work thickness
Work thickness: t0.65 min. (thickness before press)
Surface treatment: 60g/m2 max.
SD stud (ATC stud)
| Size | M5 | M6 |
|---|---|---|
| d1 | M5×0.8 | M6×1.0 |
| d2 | 6 | 7 |
| t | 0.7 | 0.9 |
| L | 10 | 10 |
| – | 13 | |
| 15 | 15 | |
| 20 | 20 | |
| 25 | 25 |
*There is stud with pilot for M6.
Material: SWCH10～12 (Strength Classification: 4.8)
Surface Treatment: Zinc or Copper plating
Permissible work thickness
Work thickness: t0.6 min. (thickness before press)
Surface treatment: 60g/m2 max.
TS stud / ABA stud
| Size | 5 | 6 |
|---|---|---|
| d1 | 5 | 6 |
| d2 | 6 | 7 |
| t | 0.7 | 1.5 |
| L | 10 | – |
| 15 | 15 | |
| – | 18 | |
| 20 | 20 | |
| 25 | 25 |
Material: SWCH10～12
Surface Treatment: Zinc or Copper plating
Permissible work thickness
Work thickness: t0.6 min. (thickness before press)
Surface treatment: 60g/m2 max.
MT stud
| Size | MT1 | MT2 |
|---|---|---|
| ｄ1 | 5 | 5 |
| ｄ2 | 3 | 3 |
| ｔ | 0.9 | 2 |
| L | 6.0 | 7.1 |
| Height after welding | 5.0 | 6.1 |
Material: SUSXM7
Surface treatment: no
Permissible work thickness
Work thickness: t0.6 min. (thickness before press)
Surface treatment: 60g/m2 max.
PIN Stud (ANC Stud)
| Size | 6 | 8 |
|---|---|---|
| d1 | 6 | 8 |
| d2 | 7 | 9 |
| t | 0.9 | 11 |
| L | 15 | – |
| 20 | 20 | |
| 40 | – |
Material: SWCH10～12
Surface treatment: Copper
Permissible work thickness
Thickness: t0.6 min. (Before press)
Surface treatment: 60g/m2 max.
PTS stud
| Size | 6 | 6 |
|---|---|---|
| ｄ1 | 6 | 6 |
| ｄ2 | 9 | 11 |
| ｔ | 1.2 | 1.2 |
| L | 20 | 20 |
Material: SWCH10～12
Surface treatment: Zinc plating
Permissible work thickness
Thickness: t0.65 min.
*In case that d2 is 11,
t0.8 min. (Before press)
Surface treatment: 60g/m2 max.
T stud
| Size | T |
|---|---|
| ｄ1 | 5 |
| ｄ2 | 3 |
| ｔ | 0.9 |
| L | 4.0 |
| Height after welding | 3.4 |
Material: SUSXM7
Surface treatment: No
Permissible work thickness
Thickness: t0.6 min. (Before press)
Surface treatment: 60g/m2 max.
Tokyo branch office: 81-(0)44-333-6500
Chubu branch office: 81-(0)566-45-5241
Osaka branch office: 81-(0)6-6385-2332
Chugoku branch office: 81-(0)82-532-1785